vtkGeoCamera - Geo interface to a camera. More...
Inheritance diagram for Kitware.VTK.vtkGeoCamera:
Collaboration diagram for Kitware.VTK.vtkGeoCamera:
Public Member Functions | |
| vtkGeoCamera (IntPtr rawCppThis, bool callDisposalMethod, bool strong) | |
| Automatically generated constructor - called from generated code. DO NOT call directly. More... | |
| vtkGeoCamera () | |
| Undocumented Block More... | |
| virtual double | GetDistance () |
| Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ???? More... | |
| virtual double | GetHeading () |
| Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south. -90 is west. Rotate Heading around -y axis Center, More... | |
| virtual double | GetLatitude () |
| Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude, More... | |
| virtual bool | GetLockHeading () |
| Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes. More... | |
| virtual double | GetLongitude () |
| Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis), More... | |
| double | GetNodeCoverage (vtkGeoTerrainNode node) |
| This method estimates how much of the view is covered by the sphere. Returns a value from 0 to 1. More... | |
| virtual double[] | GetOrigin () |
| Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points. More... | |
| virtual void | GetOrigin (ref double _arg1, ref double _arg2, ref double _arg3) |
| Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points. More... | |
| virtual void | GetOrigin (IntPtr _arg) |
| Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points. More... | |
| virtual double | GetOriginLatitude () |
| This point is shifted to 0,0,0 to avoid openGL issues. More... | |
| virtual double | GetOriginLongitude () |
| This point is shifted to 0,0,0 to avoid openGL issues. More... | |
| virtual double[] | GetPosition () |
| Get the world position without the origin shift. More... | |
| virtual void | GetPosition (ref double _arg1, ref double _arg2, ref double _arg3) |
| Get the world position without the origin shift. More... | |
| virtual void | GetPosition (IntPtr _arg) |
| Get the world position without the origin shift. More... | |
| virtual double | GetTilt () |
| Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis, More... | |
| vtkCamera | GetVTKCamera () |
| This vtk camera is updated to match this geo cameras state. It should be treated as a const and should not be modified. More... | |
| void | InitializeNodeAnalysis (IntPtr rendererSize) |
| We precompute some values to speed up update of the terrain. Unfortunately, they have to be manually/explicitly updated when the camera or renderer size changes. More... | |
| override int | IsA (string type) |
| Undocumented Block More... | |
| virtual void | LockHeadingOff () |
| Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes. More... | |
| virtual void | LockHeadingOn () |
| Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes. More... | |
| new vtkGeoCamera | NewInstance () |
| Undocumented Block More... | |
| void | SetDistance (double Distance) |
| Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ???? More... | |
| void | SetHeading (double heading) |
| Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south. -90 is west. Rotate Heading around -y axis Center, More... | |
| void | SetLatitude (double latitude) |
| Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude, More... | |
| virtual void | SetLockHeading (bool _arg) |
| Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes. More... | |
| void | SetLongitude (double longitude) |
| Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis), More... | |
| void | SetOrigin (double ox, double oy, double oz) |
| Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points. More... | |
| void | SetOriginLatitude (double oLat) |
| This point is shifted to 0,0,0 to avoid openGL issues. More... | |
| void | SetOriginLongitude (double oLat) |
| This point is shifted to 0,0,0 to avoid openGL issues. More... | |
| void | SetTilt (double tilt) |
| Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis, More... | |
 Public Member Functions inherited from Kitware.VTK.vtkObject | |
| vtkObject (IntPtr rawCppThis, bool callDisposalMethod, bool strong) | |
| Automatically generated constructor - called from generated code. DO NOT call directly. More... | |
| vtkObject () | |
| Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More... | |
| uint | AddObserver (uint arg0, vtkCommand arg1, float priority) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| uint | AddObserver (string arg0, vtkCommand arg1, float priority) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| virtual void | DebugOff () |
| Turn debugging output off. More... | |
| virtual void | DebugOn () |
| Turn debugging output on. More... | |
| vtkCommand | GetCommand (uint tag) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| byte | GetDebug () |
| Get the value of the debug flag. More... | |
| virtual uint | GetMTime () |
| Return this object's modified time. More... | |
| int | HasObserver (uint arg0, vtkCommand arg1) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| int | HasObserver (string arg0, vtkCommand arg1) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| int | HasObserver (uint arg0) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| int | HasObserver (string arg0) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| int | InvokeEvent (uint arg0, IntPtr callData) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| int | InvokeEvent (string arg0, IntPtr callData) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| int | InvokeEvent (uint arg0) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| int | InvokeEvent (string arg0) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| override int | IsA (string type) |
| Undocumented Block More... | |
| virtual void | Modified () |
| Update the modification time for this object. Many filters rely on the modification time to determine if they need to recompute their data. The modification time is a unique monotonically increasing unsigned long integer. More... | |
| vtkObject | NewInstance () |
| Undocumented Block More... | |
| void | RemoveAllObservers () |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| void | RemoveObserver (vtkCommand arg0) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| void | RemoveObserver (uint tag) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| void | RemoveObservers (uint arg0, vtkCommand arg1) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| void | RemoveObservers (string arg0, vtkCommand arg1) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| void | RemoveObservers (uint arg0) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| void | RemoveObservers (string arg0) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| void | SetDebug (byte debugFlag) |
| Set the value of the debug flag. A non-zero value turns debugging on. More... | |
| override string | ToString () |
| Returns the result of calling vtkObject::Print as a C# string. More... | |
| delegate void | vtkObjectEventHandler (vtkObject sender, vtkObjectEventArgs e) |
| Generic signature for all vtkObject events. More... | |
| void | RemoveAllHandlersForAllEvents () |
| Call RemoveAllHandlers on each non-null vtkObjectEventRelay. TODO: This method needs to get called by the generated Dispose. Make that happen... More... | |
| Public Member Functions inherited from Kitware.VTK.vtkObjectBase | |
| vtkObjectBase (IntPtr rawCppThis, bool callDisposalMethod, bool strong) | |
| Automatically generated constructor - called from generated code. DO NOT call directly. More... | |
| vtkObjectBase () | |
| Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More... | |
| virtual void | Register (vtkObjectBase o) |
| Increase the reference count (mark as used by another object). More... | |
| virtual void | FastDelete () |
| Delete a reference to this object. This version will not invoke garbage collection and can potentially leak the object if it is part of a reference loop. Use this method only when it is known that the object has another reference and would not be collected if a full garbage collection check were done. More... | |
| string | GetClassName () |
| Return the class name as a string. This method is defined in all subclasses of vtkObjectBase with the vtkTypeMacro found in vtkSetGet.h. More... | |
| int | GetReferenceCount () |
| Return the current reference count of this object. More... | |
| void | SetReferenceCount (int arg0) |
| Sets the reference count. (This is very dangerous, use with care.) More... | |
Static Public Member Functions | |
| static new vtkGeoCamera | New () |
| Undocumented Block More... | |
| static new int | IsTypeOf (string type) |
| Undocumented Block More... | |
| static new vtkGeoCamera | SafeDownCast (vtkObjectBase o) |
| Undocumented Block More... | |
| Static Public Member Functions inherited from Kitware.VTK.vtkObject | |
| static new vtkObject | New () |
| Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More... | |
| static void | BreakOnError () |
| This method is called when vtkErrorMacro executes. It allows the debugger to break on error. More... | |
| static int | GetGlobalWarningDisplay () |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| static void | GlobalWarningDisplayOff () |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| static void | GlobalWarningDisplayOn () |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| static new int | IsTypeOf (string type) |
| Undocumented Block More... | |
| static vtkObject | SafeDownCast (vtkObjectBase o) |
| Undocumented Block More... | |
| static void | SetGlobalWarningDisplay (int val) |
| This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
| Static Public Member Functions inherited from Kitware.VTK.vtkObjectBase | |
| static vtkObjectBase | New () |
| Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More... | |
| static int | IsTypeOf (string name) |
| Return 1 if this class type is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h. More... | |
Public Attributes | |
| new const string | MRFullTypeName = "Kitware.VTK.vtkGeoCamera" |
| Automatically generated type registration mechanics. More... | |
| Public Attributes inherited from Kitware.VTK.vtkObject | |
| new const string | MRFullTypeName = "Kitware.VTK.vtkObject" |
| Automatically generated type registration mechanics. More... | |
| Public Attributes inherited from Kitware.VTK.vtkObjectBase | |
| new const string | MRFullTypeName = "Kitware.VTK.vtkObjectBase" |
| Automatically generated type registration mechanics. More... | |
| Public Attributes inherited from Kitware.VTK.WrappedObject | |
| const string | vtkChartsEL_dll = "libKitware.VTK.vtkCharts.Unmanaged.so" |
| Export layer functions for 'vtkCharts' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkCommonEL_dll = "libKitware.VTK.vtkCommon.Unmanaged.so" |
| Export layer functions for 'vtkCommon' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkFilteringEL_dll = "libKitware.VTK.vtkFiltering.Unmanaged.so" |
| Export layer functions for 'vtkFiltering' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkGenericFilteringEL_dll = "libKitware.VTK.vtkGenericFiltering.Unmanaged.so" |
| Export layer functions for 'vtkGenericFiltering' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkGeovisEL_dll = "libKitware.VTK.vtkGeovis.Unmanaged.so" |
| Export layer functions for 'vtkGeovis' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkGraphicsEL_dll = "libKitware.VTK.vtkGraphics.Unmanaged.so" |
| Export layer functions for 'vtkGraphics' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkHybridEL_dll = "libKitware.VTK.vtkHybrid.Unmanaged.so" |
| Export layer functions for 'vtkHybrid' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkIOEL_dll = "libKitware.VTK.vtkIO.Unmanaged.so" |
| Export layer functions for 'vtkIO' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkImagingEL_dll = "libKitware.VTK.vtkImaging.Unmanaged.so" |
| Export layer functions for 'vtkImaging' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkInfovisEL_dll = "libKitware.VTK.vtkInfovis.Unmanaged.so" |
| Export layer functions for 'vtkInfovis' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkParallelEL_dll = "libKitware.VTK.vtkParallel.Unmanaged.so" |
| Export layer functions for 'vtkParallel' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkRenderingEL_dll = "libKitware.VTK.vtkRendering.Unmanaged.so" |
| Export layer functions for 'vtkRendering' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkViewsEL_dll = "libKitware.VTK.vtkViews.Unmanaged.so" |
| Export layer functions for 'vtkViews' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkVolumeRenderingEL_dll = "libKitware.VTK.vtkVolumeRendering.Unmanaged.so" |
| Export layer functions for 'vtkVolumeRendering' are exported from the DLL named by the value of this variable. More... | |
| const string | vtkWidgetsEL_dll = "libKitware.VTK.vtkWidgets.Unmanaged.so" |
| Export layer functions for 'vtkWidgets' are exported from the DLL named by the value of this variable. More... | |
Static Public Attributes | |
| static new readonly string | MRClassNameKey = "12vtkGeoCamera" |
| Automatically generated type registration mechanics. More... | |
| Static Public Attributes inherited from Kitware.VTK.vtkObject | |
| static new readonly string | MRClassNameKey = "9vtkObject" |
| Automatically generated type registration mechanics. More... | |
| Static Public Attributes inherited from Kitware.VTK.vtkObjectBase | |
| static new readonly string | MRClassNameKey = "13vtkObjectBase" |
| Automatically generated type registration mechanics. More... | |
Protected Member Functions | |
| override void | Dispose (bool disposing) |
| Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly. More... | |
| Protected Member Functions inherited from Kitware.VTK.vtkObject | |
| override void | Dispose (bool disposing) |
| Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly. More... | |
| Protected Member Functions inherited from Kitware.VTK.vtkObjectBase | |
| override void | Dispose (bool disposing) |
| Decrease the reference count (release by another object). This has the same effect as invoking Delete() (i.e., it reduces the reference count by 1). More... | |
| Protected Member Functions inherited from Kitware.VTK.WrappedObject | |
| WrappedObject (IntPtr rawCppThis, bool callDisposalMethod, bool strong) | |
| Constructor expected by the mummy Runtime. More... | |
Static Private Member Functions | |
| static | vtkGeoCamera () |
| Automatically generated type registration mechanics. More... | |
Additional Inherited Members | |
| Properties inherited from Kitware.VTK.vtkObject | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | AbortCheckEvt |
| The AbortCheckEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.AbortCheckEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | AnimationCueTickEvt |
| The AnimationCueTickEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.AnimationCueTickEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | AnyEvt |
| The AnyEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.AnyEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | CharEvt |
| The CharEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.CharEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ConfigureEvt |
| The ConfigureEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ConfigureEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ConnectionClosedEvt |
| The ConnectionClosedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ConnectionClosedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ConnectionCreatedEvt |
| The ConnectionCreatedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ConnectionCreatedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | CreateTimerEvt |
| The CreateTimerEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.CreateTimerEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | CursorChangedEvt |
| The CursorChangedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.CursorChangedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | DeleteEvt |
| The DeleteEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.DeleteEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | DestroyTimerEvt |
| The DestroyTimerEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.DestroyTimerEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | DisableEvt |
| The DisableEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.DisableEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | DomainModifiedEvt |
| The DomainModifiedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.DomainModifiedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | EnableEvt |
| The EnableEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.EnableEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | EndAnimationCueEvt |
| The EndAnimationCueEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.EndAnimationCueEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | EndEvt |
| The EndEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.EndEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | EndInteractionEvt |
| The EndInteractionEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.EndInteractionEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | EndPickEvt |
| The EndPickEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.EndPickEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | EndWindowLevelEvt |
| The EndWindowLevelEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.EndWindowLevelEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | EnterEvt |
| The EnterEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.EnterEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ErrorEvt |
| The ErrorEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ErrorEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ExecuteInformationEvt |
| The ExecuteInformationEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ExecuteInformationEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ExitEvt |
| The ExitEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ExitEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ExposeEvt |
| The ExposeEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ExposeEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | InteractionEvt |
| The InteractionEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.InteractionEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | KeyPressEvt |
| The KeyPressEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.KeyPressEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | KeyReleaseEvt |
| The KeyReleaseEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.KeyReleaseEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | LeaveEvt |
| The LeaveEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.LeaveEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | LeftButtonPressEvt |
| The LeftButtonPressEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.LeftButtonPressEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | LeftButtonReleaseEvt |
| The LeftButtonReleaseEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.LeftButtonReleaseEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | MiddleButtonPressEvt |
| The MiddleButtonPressEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.MiddleButtonPressEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | MiddleButtonReleaseEvt |
| The MiddleButtonReleaseEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.MiddleButtonReleaseEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ModifiedEvt |
| The ModifiedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ModifiedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | MouseMoveEvt |
| The MouseMoveEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.MouseMoveEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | MouseWheelBackwardEvt |
| The MouseWheelBackwardEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.MouseWheelBackwardEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | MouseWheelForwardEvt |
| The MouseWheelForwardEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.MouseWheelForwardEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | PickEvt |
| The PickEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.PickEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | PlacePointEvt |
| The PlacePointEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.PlacePointEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | PlaceWidgetEvt |
| The PlaceWidgetEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.PlaceWidgetEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ProgressEvt |
| The ProgressEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ProgressEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | PropertyModifiedEvt |
| The PropertyModifiedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.PropertyModifiedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | RegisterEvt |
| The RegisterEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.RegisterEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | RenderEvt |
| The RenderEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.RenderEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | RenderWindowMessageEvt |
| The RenderWindowMessageEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.RenderWindowMessageEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ResetCameraClippingRangeEvt |
| The ResetCameraClippingRangeEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ResetCameraClippingRangeEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ResetCameraEvt |
| The ResetCameraEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ResetCameraEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | ResetWindowLevelEvt |
| The ResetWindowLevelEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.ResetWindowLevelEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | RightButtonPressEvt |
| The RightButtonPressEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.RightButtonPressEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | RightButtonReleaseEvt |
| The RightButtonReleaseEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.RightButtonReleaseEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | SelectionChangedEvt |
| The SelectionChangedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.SelectionChangedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | SetOutputEvt |
| The SetOutputEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.SetOutputEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | StartAnimationCueEvt |
| The StartAnimationCueEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.StartAnimationCueEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | StartEvt |
| The StartEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.StartEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | StartInteractionEvt |
| The StartInteractionEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.StartInteractionEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | StartPickEvt |
| The StartPickEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.StartPickEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | StartWindowLevelEvt |
| The StartWindowLevelEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.StartWindowLevelEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | TimerEvt |
| The TimerEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.TimerEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | UnRegisterEvt |
| The UnRegisterEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.UnRegisterEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | UpdateEvt |
| The UpdateEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.UpdateEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | UpdateInformationEvt |
| The UpdateInformationEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.UpdateInformationEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | UpdatePropertyEvt |
| The UpdatePropertyEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.UpdatePropertyEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | VolumeMapperComputeGradientsEndEvt |
| The VolumeMapperComputeGradientsEndEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.VolumeMapperComputeGradientsEndEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | VolumeMapperComputeGradientsProgressEvt |
| The VolumeMapperComputeGradientsProgressEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.VolumeMapperComputeGradientsProgressEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | VolumeMapperComputeGradientsStartEvt |
| The VolumeMapperComputeGradientsStartEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.VolumeMapperComputeGradientsStartEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | VolumeMapperRenderEndEvt |
| The VolumeMapperRenderEndEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.VolumeMapperRenderEndEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | VolumeMapperRenderProgressEvt |
| The VolumeMapperRenderProgressEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.VolumeMapperRenderProgressEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | VolumeMapperRenderStartEvt |
| The VolumeMapperRenderStartEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.VolumeMapperRenderStartEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | WarningEvt |
| The WarningEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.WarningEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | WidgetActivateEvt |
| The WidgetActivateEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.WidgetActivateEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | WidgetModifiedEvt |
| The WidgetModifiedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.WidgetModifiedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | WidgetValueChangedEvt |
| The WidgetValueChangedEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.WidgetValueChangedEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | WindowLevelEvt |
| The WindowLevelEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.WindowLevelEvent as the eventId parameter. More... | |
| Kitware.VTK.vtkObject.vtkObjectEventHandler | WrongTagEvt |
| The WrongTagEvt event is invoked when the sender's InvokeEvent method is called with vtkCommand.EventIds.WrongTagEvent as the eventId parameter. More... | |
Detailed Description
vtkGeoCamera - Geo interface to a camera.
Description I wanted to hide the normal vtkCamera API so I did not make this a subclass. The camera is a helper object. You can get a pointer to the camera, but it should be treated like a const.
Constructor & Destructor Documentation
|
staticprivate |
Automatically generated type registration mechanics.
| Kitware.VTK.vtkGeoCamera.vtkGeoCamera | ( | IntPtr | rawCppThis, |
| bool | callDisposalMethod, | ||
| bool | strong | ||
| ) |
Automatically generated constructor - called from generated code. DO NOT call directly.
| Kitware.VTK.vtkGeoCamera.vtkGeoCamera | ( | ) |
Undocumented Block
Member Function Documentation
|
protected |
Automatically generated protected Dispose method - called from public Dispose or the C# destructor. DO NOT call directly.
|
virtual |
Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ????
|
virtual |
Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south. -90 is west. Rotate Heading around -y axis Center,
|
virtual |
Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude,
|
virtual |
Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
|
virtual |
Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis),
| double Kitware.VTK.vtkGeoCamera.GetNodeCoverage | ( | vtkGeoTerrainNode | node) |
This method estimates how much of the view is covered by the sphere. Returns a value from 0 to 1.
|
virtual |
Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
|
virtual |
Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
|
virtual |
Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
|
virtual |
This point is shifted to 0,0,0 to avoid openGL issues.
|
virtual |
This point is shifted to 0,0,0 to avoid openGL issues.
|
virtual |
Get the world position without the origin shift.
|
virtual |
Get the world position without the origin shift.
|
virtual |
Get the world position without the origin shift.
|
virtual |
Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis,
| vtkCamera Kitware.VTK.vtkGeoCamera.GetVTKCamera | ( | ) |
This vtk camera is updated to match this geo cameras state. It should be treated as a const and should not be modified.
Here is the call graph for this function:
| void Kitware.VTK.vtkGeoCamera.InitializeNodeAnalysis | ( | IntPtr | rendererSize) |
We precompute some values to speed up update of the terrain. Unfortunately, they have to be manually/explicitly updated when the camera or renderer size changes.
|
virtual |
Undocumented Block
Reimplemented from Kitware.VTK.vtkObjectBase.
|
static |
Undocumented Block
|
virtual |
Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
|
virtual |
Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
|
static |
Undocumented Block
| new vtkGeoCamera Kitware.VTK.vtkGeoCamera.NewInstance | ( | ) |
Undocumented Block
|
static |
Undocumented Block
Here is the call graph for this function:
| void Kitware.VTK.vtkGeoCamera.SetDistance | ( | double | Distance) |
Distance is in Meters Relative to Longitude and Latitude. above sea level ???? should we make this from center of earth ???? ???? what about equatorial bulge ????
| void Kitware.VTK.vtkGeoCamera.SetHeading | ( | double | heading) |
Heading is in degrees: (-180->180) Relative to Logitude and Latitude. 0 is north. 90 is east. ???? what is the standard ???? 180 is south. -90 is west. Rotate Heading around -y axis Center,
| void Kitware.VTK.vtkGeoCamera.SetLatitude | ( | double | latitude) |
Latitude is in degrees: (-90->90) Relative to Longitude. Rotate Latitude around x axis by Latitude,
|
virtual |
Whether to lock the heading a particular value, or to let the heading "roam free" when performing latitude and longitude changes.
| void Kitware.VTK.vtkGeoCamera.SetLongitude | ( | double | longitude) |
Longitude is in degrees: (-180->180) Relative to absolute coordinates. Rotate Longitude around z axis (earth axis),
| void Kitware.VTK.vtkGeoCamera.SetOrigin | ( | double | ox, |
| double | oy, | ||
| double | oz | ||
| ) |
Get the rectilinear cooridinate location of the origin. This is used to shift the terrain points.
| void Kitware.VTK.vtkGeoCamera.SetOriginLatitude | ( | double | oLat) |
This point is shifted to 0,0,0 to avoid openGL issues.
| void Kitware.VTK.vtkGeoCamera.SetOriginLongitude | ( | double | oLat) |
This point is shifted to 0,0,0 to avoid openGL issues.
| void Kitware.VTK.vtkGeoCamera.SetTilt | ( | double | tilt) |
Tilt is also know as pitch. Tilt is in degrees: (0->90) Relative to Longitude, Latitude, and Heading. Rotate Tilt around x axis,
Member Data Documentation
|
static |
Automatically generated type registration mechanics.
| new const string Kitware.VTK.vtkGeoCamera.MRFullTypeName = "Kitware.VTK.vtkGeoCamera" |
Automatically generated type registration mechanics.
The documentation for this class was generated from the following file:
- csharp/vtkGeoCamera.cs
